MOUNTED TYPE OFFSET DISC HARROW

MTOD

PHOTO GALLERY

TECHNICAL SPECIFICATIONS 

- Materials used in offset disc harrows are inspected completely before manufacturing step and prepared for manufacturing after passing along the test step and quality materials are used.

- Thanks to its design, the adjustments are simple and it is a very easy to operate machine.

- There are two disc group on the machine. Front and end disc group were aligned onto the chassis as offset type.

- It may be used in forested areas by three sliding loops easily.

- This machine may be used hydraulically.

- As well as boron steels with a diameter of 460 mm, European and domestic discs with diameter of 510 mm may be installed on our machines.

- It may be used within a desired angke with curve adjusting spring pins on the baterries.

- There are scrapers as sharp as the disc to clean the stuck soil on each disc during the operation.

- There is a discharge lubricator to visualize the discharge of the oil which is filled in the bearing together with the double mat and double roller in our bearings.

- You may cultivate your field without loosing time and opening a furrow pit with the guide disc.

- Pulleys are manufactured from the steel and their breakage was prevented because of the stone or different reasons in the field.


TECHNICAL TABLE


TECHNICAL DRAWING