TRAILED AND MOUNTED V TYPE OFFSET DISC HARROW

TMVT

PHOTO GALLERY

TECHNICAL SPECIFICATIONS  

- Materials used in offset disc harrows are inspected completely before manufacturing step and prepared for manufacturing after passing along the test step and quality materials are used.

- Thanks to its design, the adjustments are simple and it is a very easy to operate machine. This machine may be used as both trailed and hydraulic.

- Two chassis types may be manufactured as normal and big chassis upon request.

- As well as boron steels with a diameter of 460 mm, European and domestic discs with diameter of 510 mm may be installed on our machines.

- Automated curve assembly has an operation feature on desired angle with spring lock system.

- Upon request, an curve adjusting assembly may be installed to adjust the curve without getting off the tractor.

- There are scrapers as sharp as the disc to clean the stuck soil on each disc during the operation.

- There is a discharge lubricator to visualize the discharge of the oil which is filled in the bearing together with the double seal and double bearing in our bearings.

- You may cultivate your field without loosing time and opening a furrow pit with the guide disc.

- Pulleys are manufactured from the steel and their breakage was prevented because of the stone or different reasons in the field.

 


TECHNICAL TABLE


TECHNICAL DRAWING